Transport wheelchair for the disabled MIRID MKX-02B (with electric motor)

Transport wheelchair for disabled MIRID MKX-02B will help to transfer
disabled or paralyzed patient from bed to chair, shower or toilet.

The unique design of MIRID MKX-02A combines:

1) wheelchair;
2) system for transporting the patient;
3) toilet seat;
4) shower chair;

The lifting height is easily adjusted to the desired level, it is convenient to transport.

Advantages:

• Height adjustment using an electric drive
• The frame is made of steel
• Optimal anti-corrosion coating
• Handles and back made of medical eco-rubber
• Rear fenders rotate 360 ​​degrees
• Seat made of medical ABC plastic
• Strong frame combined with light weight
• Medical silent wheels
• All four wheels with brakes
• Low-friction rollers significantly improve handling and increase safety
• The maximum load is 120 kg

When using this shower chair, remove the motor by pulling the handle back and remove the remote control to prevent water ingress

Does not take up much space, simple and convenient to use.

Seat height adjustment using an electric motor from 440 to 620 mm

For safe and comfortable operation of the chair, the toilet bowl should be installed only when necessary.

Instructions for use

1. Turn on the power using the remote control or motor operation panel, press the "Up" or "Down" button to set the seat to a height 1 cm higher than where the patient is sitting upright, open the chair, and then move it to to the patient

Raise the patient's feet to step on the pedals.

Make sure the brakes are locked until the patient is in the chair;

2. When the patient leans left and right, turn the corresponding side of the chair to accommodate the patient;

After the patient sits down, connect the chair behind the back and fix the automatic fastener;

Then lock the security lock.

3. Unlock the brakes while the patient is seated with the double lock locked. Grasp the front handles to move the patient.

4. After the patient is moved to the desired position, press the Up or Down button to set the seat to a height of 1 cm higher than desired, then press the brakes, unlock and open the seat from the back so that the patient can smoothly sit down in the desired place.

Technical characteristics:

• Chair length: 71,1 sm
• Seat width: 42,5 sm
• Height of handles: 90,2 sm - 108,2 sm
• Seat height from the floor: 42 sm - 60 sm
• Frame: steel
• Back material: medical eco-plastic
• Handle material: medical eco-rubber
• Seat material: medical ABC plastic
• Maximum load: 120 kg
• Net weight: 30 kg
  

The quality is confirmed by European certificates!

Download the instruction manual

Warranty 12 months. Service maintenance.